#JITSI MEET LOGO INSTALL#
#JITSI MEET LOGO REGISTRATION#
#JITSI MEET LOGO PASSWORD#

Recheck the status to ensure that the ports are open. Run the following command and answer y when prompted to enable ufw: You will receive the following output to indicate these ports are open (including OpenSSH): Run the following ufw commands to open these ports:Ĭheck that they were all added with the ufw status command: 10000/udp 3478/udp 5349/tcp: Ports that will transmit and receive the encrypted call traffic.443/tcp: Port used for the conference room creation web page.

#JITSI MEET LOGO REGISTRATION#

80/tcp: Port used in the TLS certificate registration request.Next, open the following ports for Jitsi: If you have not yet allowed SSH traffic through UFW, run the following command: The TLS installation process also requires a port open to authenticate the certificate registration request. The Jitsi server needs some additional ports open to communicate with the call participants. When you followed the Initial Server Setup with Ubuntu 22.04, you enabled the UFW firewall and opened the SSH port. In the next step, you will open the firewall ports needed by Jitsi and the TLS certificate installer. Your server now has the hostname and IP address setting Jitsi requires when installed. # The following lines are desirable for IPv6 capable hosts # /etc/cloud/cloud.cfg or cloud-config from user-data # b.) change or remove the value of 'manage_etc_hosts' in # a.) make changes to the master file in /etc/cloud/templates/ # As a result, if you wish for changes to this file to persist etc/hosts # Your system has configured 'manage_etc_hosts' as True.

This command will return the hostname you set with the hostnamectl command:

set-hostname: Sets the system hostname.Ĭheck that the hostname was set with the following command:.

hostnamectl: A utility from the systemd tool suite to manage the system hostname.

The command that you ran breaks down as follows:

#JITSI MEET LOGO PASSWORD#

sudo hostnamectl set-hostname jitsi.your_domainĮnter your password when prompted.

The following command will set the current hostname and modify the /etc/hostname that holds the system’s hostname between reboots: Jitsi Meet uses both settings when it installs and generates its configuration files.įirst, set the system’s hostname to the domain name that you will use for your Jitsi instance. You will also locally resolve that hostname to your server’s public IP. In this step, you will change the system’s hostname to match the domain name you intend to use for your Jitsi Meet instance. Log in to your server as the non-root, sudo-enabled user before starting Step 1. Call data is routed through the Jitsi Meet server when more than two clients are present. The jump in resource use between two and three participants is because Jitsi will route the call data directly between the clients when there are two of them. The following benchmark information was collected from a single-core virtual machine using high-quality video settings: When choosing a server to run your Jitsi Meet instance, you need to consider the system resources for hosting conference rooms. This guide uses the example domain name jitsi.your_domain. Use the DNS Quickstart Guide to point domains to DigitalOcean servers.

A domain name configured to point to your server.

The table below will give you an idea of what is required.

The size of the server you need will depend on the available bandwidth and the number of participants you expect to in the conferences. One Ubuntu 22.04 server with a non-root sudo-enabled user and a firewall, which you can set up by following the Initial Server Setup with Ubuntu 22.04.Prerequisitesīefore you begin this guide, you will need the following: After creating the conference room, anyone can join it if they have the unique address and optional password. You will also configure Jitsi Meet so that only registered users can create new conference rooms. The default Jitsi configuration allows anyone who can browse the server to create a new conference room, which is not ideal for a publicly available server on the internet.

#JITSI MEET LOGO INSTALL#

In this tutorial, you will install and configure a Jitsi Meet server on Ubuntu 22.04. With Jitsi, you can ensure that your private information stays that way. The end-to-end TLS encryption ensures that no one can snoop on the call. The benefit of a Jitsi conference is that all your data only passes through your server. A Jitsi Meet server provides multi-person video conference rooms that you can access using with just your browser while providing comparable functionality to a Zoom or Skype conference call. Jitsi Meet is an open-source video-conferencing application based on WebRTC. The author selected the Open Internet/Free Speech Fund to receive a donation as part of the Write for DOnations program.

Jitsi meet logo